User's Manual

User Manual
WCB1000H5PX/WCB1010H5PX IEEE802.11bg High Power BS/Bridge/CPE
8
7. Ethernet : Green LED ON indicates connection, OFF indicates no connection
8. PoE Connector : For connecting to PSE
9. N-Type reverse Connector : For connecting to N-Type Female reverse connector
WCB1010H5PX
Front Panel Rear Panel
1. Reset Button : system reboot button press until LED flashed and release for system reboot or for reset to
factory default press, LED flashes keep pressing until LED becomes static
2. Power : Red LED ON indicates power on, and OFF indicates power off
3. Signal Strength : Yellow LED ON indicates Low Signal (CPE Mode)
4. Signal Strength : Green LED ON indicates Normal Signal (CPE Mode) or (BRIDGE Mode Only)
5. Signal Strength : Green LED ON indicates High Signal (CPE Mode) or (BASE STATION Mode Only)
6. WLAN : Green LED FLASH indicates Wireless ON, and FLASH quickly indicates
Wireless Transmit quickly.
7. Ethernet : Green LED ON indicates connection, OFF indicates no connection
8. PoE Connector : For connecting to PSE
Note :
In CEP Mode, the LED 3 ON indicates the signal Low ( Signal <= 10 RSSI); the LED 3 and 4 ON
indicate the signal Normal (10 < Signal <=40 RSSI); the LED 3, 4 and 5 ON indicate the signal High
( Signal > 40 ).
Only LED 4 ON indicates the operating mode is BRIDGE Mode; only LED 5 ON indicates the operating
mode is BASE STATION Mode.