User's Manual

EW-7301APg/EW-7302APg
User Manual
93
Step 3-2: Plug Connected-E & B with Part -F.
The figure below illustrates the connected result.
Step 4: Connect Part-C with Part-G
Tear off top sticker (white) from part-C, and then attach part-C to part-G.
Step 5: Install UTP Cable
Install UTP Cable through Part-A , the connected-part-B, and the connected-part-G.
Step 6: Install RJ-45 Connector on UTP Cable
Install a RJ-45 connector on UTP Cable with Straight through method, Pin-to-Pin compatible, as figure illustrates below.
• Straight Through Table:
Type Wire Map
Straight through
1 2 3 6 4 5 7 8
1 2 3 6 4 5 7 8