User's Manual

EW-7301APg/EW-7302APg

User Manual

Appendix A. EZ Connector Installation

Please follow the procedures below to install the waterproof connector for Ethernet cable.

Step 1: The Connector Package

There is a connector pack included with the system as show in figure below.

Step 2: Connector Parts Included

There are 7 parts included in the connect pack as shown in the figure below, part-A to part-G.

Step 3: Connect the Part-E, Part -B, and Part -F

Step 3-1: Plug Part -E into Part -B.

The figure below illustrates the connected result.