User's Manual

EW-7301APg/EW-7302APg
User Manual
70
Advanced Wireless Settings
The administrator can further tune up wireless LAN via this page.
• Beacon Interval: The duration of time for the system to transmit beacon frames. Enter a value between 25 and
500ms; the default value is 100 milliseconds.
• RTS Threshold: Tuning the Request to Send, RTS, threshold will help the system control its access to medium
and alleviate the hidden node problem. Enter a value ranging from 1 to 2346.
• Fragmentation Threshold: The value specifies the maximum size of packet allowed before data is fragmented
into multiple packets. Please use this value to tune the wireless connection if lots of retransmission happens.
Enter a value ranging from 256 to 2346.
• Broadcast SSID: When this function is enabled, devices within the valid coverage range can receive the
system’s SSID.
• Station Isolation: When this function is enabled, devices associated with the system can not communicate
with each other.
• IAPP: IAPP, Inter-Access Point Protocol, allows messages to be exchanged between APs in order to provide a
faster roaming for users when users are moving across APs. Select Enable radio button to activate this
function.
• 802.11g Protection: Associated stations with 802.11g access will be benefited from enabling this option since
their transmission rate will not be affected with surrounding existence of 802.11b stations.