Manualshelf

User's Manual

ManualsBrandsLanReady Technologies ManualsElectronicsoutdoor b/g AP
61626364656667686970
EW-7301APg/EW-7302APg
User Manual
64
Operating Mode
EW-7301APg/EW-7302APg supports two operation modes; CPE mode and AP mode. The administrator can set
the desired mode via this page, and then configure the system according to their deployment needs.
• CPE Mode: Check CPE Mode button to enable CPE mode, and then click Apply to activate the setting.
• AP Mode: Check AP Mode button to enable AP Mode, and then click Apply to activate the setting.
Note: The system immediately asks for a reboot right after clicking Apply in order to activate the mode selected.
However, the system does not ask for a reboot right after clicking Save; the mode selected will take effect upon
next reboot or power cycling the system.