User's Manual

EW-7301APg/EW-7302APg
User Manual
62
System Information
The administrator can later obtain the geographical location of the system via the information configured here.
System time can also be configured via this page where manual setting and NTP server configuration are both
supported.
y System Information: For maintenance purpose, it is recommended to have the following information stated as
clear as possible.
¾ Name: Name the system. Enter a desired name or use the default.
¾ Description: Further information of the system. Enter further information as an identifier.
¾ Location: Enter related geographical location information of the system; administrator/manager will be able
to locate the system easily.
y Time:
¾ Device Time: Display the current time of the system.
¾ Time Zone: Select an appropriate time zone from the drop down list for the system.
¾ Synchronization: Set the system time either via synchronization with a NTP server or manual
configuration.
o NTP Enabled: Enable Network Time Protocol, NTP, to synchronize the system time with NTP
server. Enter IP address or domain name of the NTP server to be associated with; at least one
NTP server’s information must be provided.
o Set Date & Time: Enable Set Date & Time; the system time can be configured manually.