User's Manual

EW-7301APg/EW-7302APg
User Manual
33
o Enable/ Disable: Check Enable button to activate this function or Disable to deactivate this function.
o Server IP Address: Enter the IP address of the assigned server for receiving the trap report.
• Syslog Configuration: Event can be exported to an external server for record keeping and management via
this function.
¾ Enable/ Disable: Check Enable button to activate this function or Disable to deactivate this function.
¾ Server IP: The IP address of the Syslog server for receiving the reported events.
¾ Server Port: The port number of the Syslog server.
¾ Log Level: Assign the type of the severity level on the events that will be reported to an external Syslog
server. Select the desired type from the drop down list.
• Auto Reboot: The system can be functioning in a healthier state when this service is enabled.
¾ Enable/ Disable: Check Enable button to activate this function or Disable to deactivate this function.
¾ Reboot Time: Select an appropriate time from the drop down list. It is suggested to have the time set at an
off-peak period when reboot has minimum impacts to online users since all users in the network will be
disconnected during reboot.