User's Manual

EW-7301APg/EW-7302APg
User Manual
27
System Information
The administrator can later obtain the geographical location of the system via the information configured here.
System time can also be configured via this page where manual setting and NTP server configuration are both
supported.
y System Information: For maintenance purpose, it is recommended to have the following information stated as
clear as possible.
¾ Name: Enter a desired name or use the default provided.
¾ Description: Denote further information of the system.
¾ Location: Enter related geographical location information of the system; administrator/ manager will be
able to locate the system easily.
y Time:
¾ Device Time: Display the current time of the system.
¾ Time Zone: Select an appropriate time zone from the drop down list.
¾ Synchronization: Set the system time either via synchronization with a NTP server or manual
configuration.
o NTP Enabled: Enable Network Time Protocol, NTP, to synchronize the system time with NTP
server. Enter IP address or domain name of the NTP server to be synced with; at least one NTP
server’s information must be provided.
o Set Date & Time: Enable Set Date & Time; the system time can be configured manually.