User's Manual

© 2008 4IPNET, INC.
4
4ipnet EAP100 User’s Manual
1.3 Deployment Topology Diagram
This above deployment scenario illustrates a deployment e xample using three access points, AP-1, AP-2 and AP-3.
 Three EAP100 systems construct a network comprising wired and wireless s egments.
 The AP-2 plays the role as a wireless bridge.
 All devices share the s ame DHCP server 192.168.1.1.
1.4 Document Conventions
Represents essential steps, actions, or messages that should not be ignored.
 Note:
Contains related information that co rre sponds to a topic.
Indicates that clicking this button will save the changes you made, but you must reboot the
system upon the completion of a ll configuration settings for the changes to take ef fect.
Indicates that clicking this button on each and every co nfiguration page w ill allow the changes
you made on the current page to take ef fect immediately.
 Sometimes the s ys tem may require a restart after clicking Apply. When a restart message
appears, the system must be restarted for the settings to take effect.
Indicates that clicking this button will clear w hat you have s et before the settings are applied.