User's Manual

© 2008 4IPNET, INC.
23
4ipnet EAP100 User’s Manual
4.1.3 Management Services
For the purpose of easy maintenance, SNMP (Simple Network Management Protocol) and remote s ys log s ervices
are pro vided in EAP100. The sys tem will be managed remotely in a centralized manner.
 VLAN for Management: The management traffic from the device can be tagged with VLAN ID. If the option is
enabled, the VLAN ID can be chosen fro m 1 to 4094.
 SNMP Configuration: By enabling SNMP service, the remote SNMP manager can obtain EAP100’ s system
status.
 Community String: Specify the password for Read and Write.
 Trap: Enable or Disable the feature. When enabled, events on Cold Start, Interface UP & Down and
Association & Disassociation can be reported to an assigned management st ation w ith specified Server
IP Address.
 Syslog Configuration: By enab ling this service, specify an external syslog server to accept syslog messages
from EAP100 remotely. Thus, by read ing the sys log message in the remote ser ver, the administrator can
review activities of all installed EAP100s in the network.
 Server Port: The port nu mber of the server.
 Log Level: Select the desired level of received events from the drop-down list bo x.