User's Manual
© 2008 4IPNET, INC.
15
4ipnet EAP100 User’s Manual
Step 3. Configure VAP (Virtual Access Point) Profile Settings
EAP100 Supports up to 8 virtual APs. By default, only 1 VAP are enabled.
Configure VAP profile settings:
(a) Select the VAP Config tab to configure the settings for each VAP.
(b) An administrator can enable or disable specific VAP from the drop-down list bo x of Profile Name.
Check VAP status
Κ
After finishing the abo ve s ettings, the s t atus of enabled Virtual APs shall be reflected on the Virtual AP
Overview page.