User's Manual

© 2008 4IPNET, INC.
9
4ipnet EAP100 User’s Manual
3. Installation
3.1 Panel Function Description
On the top panel of EAP100, there are four LEDs that are used to indicate the POWER status, the WLAN s t atus,
and the l i nk status of the two PoE Fast Ethernet LAN ports. On the front panel, there are: one POWER socket, one
RESET button, two PoE LAN ports and one CONSOLE port. The antennas are installed on the rear panel.
Front Panel
• POWER SOCKET
 Attach the pow er adapter here.
• RESET Button
 Press the button to restart the system.
• LAN 1 / LAN2:
 The LAN ports are for connection with wired networks.
• CONSOLE
 Attach the serial cable here. The ad ministrator may also obtain IP address information o f Ethernet
ports from the console port.