User's Manual

Point to Point Mode Setting

Æ Wireless0 or Wireless1

PtP mode setting is like AP mode setting, but encryption only WEP encryption

method can select. When wireless0 or wireless1 in PtP mode will also do AP

function, suggest disable SSID broadcast(Pull down select “y” in hidden SSID to

disable SSID broadcast) and set WEP encryption.

e.g.

P2P-1 Wireless0 Mac: 00.01.02.03.04.05 Wireless1 Mac: 00.01.02.03.04.06

P2P-2 Wireless0 Mac: 00.01.02.03.04.07 Wireless1 Mac: 00.01.02.03.04.08

Set P2P-1 Wireless 1 in AP/Bridge Mode, and type P2P-2 Wireless1 Mac:

00.01.02.03.04.08 in WDS macs fields. Then set WEP encryption, and disable WPA

encryption. Pull down select “y” in hidden SSID to disable SSID broadcast.

Set P2P-2 Wireless1 in AP/Bridge Mode, and type P2P-1 Wireless1 Mac:

00.01.02.03.04.06 in WDS macs fields. Then set channel the same as P2P-1

Wireless1.Set WEP encryption the same as P2P-1 Wireless1.Dsiable P2P-2 Wireless1

WPA encryption. Pull down select “y” in hidden SSID to disable SSID broadcast.

Point to Point (P2P : Wireless Bridge) Mode

L2 Switch L2 Switch

P2P-1 P2P-2

LAN1

LAN2

Wired Network