User's Manual

Mode: Bridge/AP Bridge/WDS Routing/AP Routing/WDS or Disable Wireless.

Select Bridge/AP if you want to set wireless in AP mode.

Speed: The speed are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps,11Mbps,

12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps.

Channel: You can select 1 of 3 country setting (US: Channel 1 ~ 11, ETSI:

Channel 1 ~13, Japan: Channel 1 ~ 14 )(Note: Channel 14 only 802.11b

mode). All devices on the network must share the same channel. (Note: The

wireless adapters will automatically scan and match the wireless setting.)

ESSID: Service Set Identifier (SSID) is the name designated for a specific

wireless local area network (WLAN). The SSID’s factory default setting is

default. The SSID can be easily changed to connect to an existing wireless

network or to establish a new wireless network.

Preamble: Pull down select “long” or “short”.

hidden SSID: Enable or Disable SSID broadcast. Pull down select “y” Disable

SSID broadcast or “n” Enable SSID broadcast. Disable this feature broadcasts

the SSID across the network.

Client Isolation: Pull down “y” isolation or “n” none isolation

Encryption

The OUTDOOR BRIDGE has the newest, strongest and most advanced

security features available today. When used with other 802.11 WPA (Wi-Fi

Protected Access) compatible products in a network with a RADIUS server,

the security features include:

WPA & 802.1x represent the first line of defense against network intrusion. In

the authentication process the RADIUS server verifies the identity of the client

attempting to connect to the network. Unfamiliar clients will be denied access.

EAP(Extensible Authentication Protocol) is available through the Windows XP

Operating System. You will need to use the same type of EAP protocol on all

the devices in your network when using the 802.1x feature.