User's Manual

Point to Multi Point Mode

Using the Configuration Menu

To configure the OUTDOOR BRIDGE, use a computer which is connected to

the OUTDOOR BRIDGE with an Ethernet cable (see the Network Layout

diagram).

First, disable the Access the Internet using a proxy server function. To

disable this function, go to Control Panel > Internet Options > Connections

> LAN Settings and uncheck the enable box.

Start your web browser program (Internet Explorer, Netscape Navigator) .

Type the IP address and http port of the OUTDOOR BRIDGE in the address

field

(http://192.168.2.254) and press Enter. Make sure that the IP addresses of the

OUTDOOR BRIDGE and your computer are in the same subnet.

L2 Switch

LAN2

Wired Network

L2 Switch

LAN3

Wired Network

P2P-1

P2P-2

PMP

LAN1

Wired Network

PMP ( Wireless Bridge) Mode