User's Manual
Administrator’s Manual
52
Mode: There are two types that you can select HEX and ASCII.
Advance setting in detail: Please click the hyperlink of Advance.
Figure 5-28 Advance setting of Wireless
Authntication Type:
The default is set to Auto, where it auto-detects for Shared Key
or Open System. Shared Key is when both the sender and the recipient share a WEP
key for authentication. Open Key is when the sender and the recipient do not share a
WEP key for authentication. All points on your network must use the same
authentication type.
Transmission Rates: The default setting is Auto. The range is from 1 to 54Mbps. The
rate of data transmission should be set depending on the speed of your wireless
network. You can select from a range of transmission speeds, or you can keep the
default setting, Auto, to have the Access Point automatically use the fastest possible
data rate and enable the Auto-Fallback feature. Auto-Fallback will negotiate the best
possible connection speed between the Access Point and a wireless client.
CTS Protection Mode: The default value is set to Disabled. When set to Auto, a