User's Manual

Administrator’s Manual

Transmission Mode: There are 3 mode you can select, 802.11b (2.4G,1~11Mbps),

802.11g (2.4G,54Mbps) and Mix mode(b and g)

SSID broadcast: Allows the SSID to be broadcast on your network. You may want to

enable this function while configuring your network, but make sure to disable it when

you finished. With this enabled, someone could easily obtain the SSID information with

site survey software and get unauthorized access to your network. Click Enable to

broadcast. Click Disable to increase network security and prevent the SSID from

being seen on networked

Layer2 Client Isolation: You can enable this function to isolate two different domains

or just Disable from system default.

Ex: 10.2.3.4 can’t see 10.2.4.4

Figure 5-27 Security setting

WEP Key (Wired Equivalent Privacy)A data privacy mechanism based on a 64-bit,

128-bit, or 256-bit shared key algorithm, If you do not wish to utilize WEP encryption,

make sure the Disabled is selected.