User's Manual

Administrator’s Manual
48
obtain the Public LAN and access the network resources properly, suppose you had
used static IP address and specified IP address, Subnet Mask, Default Gateway and
DNS.
‧User Authentication: You can choose to Enable or Disable user Public LAN.
‧Operation Mode: It provide one mode: NAT Mode.
NAT Mode：All IP addresses externally connected through the Public LAN
Port (these IP address must belong to the same subnet as the Public LAN
Port) will be converted into the IP address of the WAN Port and connected to
the outside network.
‧IP Address: Enter your desired IP address for setup.
‧Subnet Mask: Enter your desired Subnet Mask for setup.
Related Setup for DHCP Server of Public LAN:
DHCP Server has two choices: Disable DHCP Server and Enable DHCP Server.
(1) Disable DHCP Server: Disable the function of DHCP Server.
Figure 5-23 Disable the DHCP Server on Public LAN
(2) Enable DHCP Server: Enable the functions of DHCP Server. Appropriate setup is
needed for the standard enabling of DHCP server, and the setup information for
DHCP Server includes DHCP Scope Start IP Address, End IP Address, Preferred
DNS Server, Alternate DNS Server, Domain Name, WINS Serve, and Reserved IP
Address List.