User's Manual

Administrators Manual
40
Related information for enabling the DHCP Server includes DHCP Start IP Address,
DHCP End IP Address, Domain Name, Primary DNS IP Address, and Secondary DNS
IP address.
Fillling in the correspondent values, click “Next” to continue or “Exit” to exit.
6. Set Wireless – Access Point Connection
Please enter SSID name and select a channel and the Transmission mode, then
click next.
Figure 5-12 Set Wireless – Access Point Connection
Caution: Here provides channel from 1 to 13, however different region would
provides different chanel, depending on the local channel control. For example,
if you are in Taiwan, you can only select Channel 1~11, but in Europe region, it
supports Channel 1~13.
7. Configure Wireless port’s information
This procedure sets the related information of the Wireless port as shown in Figure
5-13. Please enter IP and Subnet Mask, and determine to Enable or Disable the