User's Manual

Administrator’s Manual
28
4. Console Interface
The interface provides two types of function,
A. The device provides a RJ11 interface for the administrator to handle different
problems and situations occurred during operation. To link to the RJ11 interface of
the device, you need a modem cable. The terminal simulation program that you use,
such as the super terminal, should be set to the parameter value of 9600,8,n,1.
The main console is a basic interface using interactive dialog boxes. Please use the
arrow keys on the keyboard to browse the menu and press the “Enter” key to select
specific menus and confirm entered value.
B. It also can be as a printer interface that connects to specific thermal line ticket
printer.
Warning: These two functions can’t be used at the same time.
4.1. Main Menu of Console interface
Once you properly connect to the serial port of the device, the console welcome
screen will appear automatically. If the welcome screen does not appear in the
terminal simulation program automatically, please try to press the “Down” arrow key,
so that the terminal simulation program will send some commands to the serial port,
and the welcome screen or the main menu will appear again. If you are still unable to
see the welcome screen or the main menu of the console, please check if the
connection of your cables and the setup of the terminal simulation program are
correct.