User's Manual
Administrator’s Manual
24
Click “Run Wizard” and the configuration wizard will guide you through the seven
steps to complete the setup.
Please refer to Chapter 5.1.1 “Configuration Wizard” for the detailed description
.
3.2.3.2. Accessing External Network from Network Section
Managed by System
If all the steps are set properly so far, we can further connect the device to the
managed network to experience the controlled network access environment. First,
connect a user-end device to the network at the Public LAN, and set the dynamic
access network. After the network address is obtained at the user end, open an
Internet browser, and link to any website. Then, the default login webpage will appear
in the Internet browser.
Figure 3-6 Entering Username and Password