User's Manual

Administrators Manual
93
Import Active Strategy: Generate the backup (image) file.
Load Strategy: It loads the backup graphic file for the setup status (Caution: Such
graphic file must be generated).
Resetting to the Factory-Default configuration: Restore to the default setting.
5.5.3 Firmware Upgrade
You can upgrade your firmware from the vendor website.
Figure 5-81 Executing the Firmware Upgrade
Warning: Firmware upgrade may cause data loss. Please refer to the version
description to see if there is any limitation before upgrading your firmware.
Click “Browse” to browse the files. After you have found the firmware image file, click
Submit” and the browser will upload such file to the device, and then the system will
start upgrading the file.
You must restart the system before the upgrade firmware is effective. If you have
modified any setting, remember to save the setting before restarting the system.
Warning: Please restart the system through the management interface. Do not
turn off the system directly and then turn on the power again. Doing so may damage
the upgraded firmware.