User's Manual
Using the Configuration Menu
To configure the OUTDOOR BRIDGE, use a computer which is connected to
the OUTDOOR BRIDGE with an Ethernet cable (see the Network Layout
diagram).
First, disable the Access the Internet using a proxy server function. To
disable this function, go to Control Panel > Internet Options > Connections
> LAN Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator) .
Type the IP address and http port of the OUTDOOR BRIDGE in the address
field
(http://192.168.2.254) and press Enter. Make sure that the IP addresses of the
OUTDOOR BRIDGE and your computer are in the same subnet.
After the connection is established, you will see the user identification window
as shown.
Note: If you have changed the default IP address assigned to the OUTDOOR BRIDGE, make
sure to enter the correct IP address.
If you want to change setting, you will see the user identification window as