User's Manual

These settings may be referred to as private settings. You may change the
LAN IP address if needed.
IP address: The default IP address is 192.168.2.254. Assign a static IP
address that is within the IP address range of your network.
IP netmask: Enter the subnet mask. All devices in the network must share the
same subnet mask..
IP gateway: Enter the IP address of the gateway in your network.
(Note: If you change any item, click “submit” to store the value. Or click “clear” to
restore previous value. To make settings working click Submit-> Reset->
Restart.)
AP Setting --> Wireless0 or Wireless1