User's Manual
3.1.4 Point-to-Multipoint (PMP) Mode
An 5-into-1 device operating in Point-to-Multipoint (PMP) Mode wirelessly connects two or
more wired networks, as shown in Figure 6. The root 5-into-1 device (LAN1) operates in PMP
Mode, while the other 5-into-1 devices (LAN2, LAN3) must operate in P2P Mode.
When operating in PMP Mode, the 5-into-1 device does not allow client associations.
The user must enter the MAC addresses (up to six) of each P2P device into the PMP system
table of Remote AP MAC addresses.