User's Manual

configure advanced Radio settings for the Repeater. Figure 18 and Table 12 detail the options.
Figure 18: Repeater Mode — Advanced
Table 12: Repeater Advanced Settings
Field Description
Beacon Interval Beacon interval (in milliseconds)
RTS Threshold RTS threshold (Bytes)
DTIM Interval DTIM interval
Protection Mode Allows user to force 802.11g protection (RTS/CTS) mode off.
Transmit Rate Selects the transmit rate: Auto or a fixed rate
Preamble Type Selects short preamble, long preamble or Auto
7.5 Access Filter
Click the Access Filter:Setup button from the Repeater Mode setup page (Figure 16) to access
the Access Filter page. The Access Filter page allows the user to configure the Repeater to
allow or deny association to itself based on the client’s MAC address. Up to 32 MAC
addresses can be added to the list.
The Repeater Mode Access Filter webpage is identical to the one for AP Mode. See Figure 15
for reference. Table 13 details the options.