Manualshelf

User's Manual

ManualsBrandsLanReady Technologies ManualsElectronics802.11b/g Access point
11121314151617181920
6.4 Access Filter
Click the Access Filter: Setup button from the AP Mode setup page (Figure 10) to access the
Access Filter page. The Access Filter page allows the user to configure the AP to allow or deny
association to itself based on the MAC address of the client. Up to 32 MAC addresses can be
added to the list. Figure 15 and Table 8 detail the options
.
Figure 15: Access Filter
Settings
The following table describes the setup options in detail.