User's Manual

Table 2:
Field Description
Mode Selects 802.11g/b mode: 802.11g only, 802.11b only, or Mixed
SSID Wireless Network Name
AutoLink
When AutoLink is enabled, the configuration utility automatically
patches the MAC Address to the SSID. This enables the client card
to generate a profile of the AP connected to with AutoLink. To
change the SSID, uncheck the AutoLink radio button and change the
SSID. Then, recheck the AutoLink radio button to continue.
Boost Mode
When used with Marvell client cards, Boost Mode enhances
throughput an additional 30% at 54 Mbps, and extends the additional
throughput at 2x the original 54 Mbps range. The result is a relative
throughput improvement of up to 300 feet.
SSID Broadcast Enable/disable the SSID broadcast feature.
Channel Selects the channel
Security Select Disable, WEP, WPA, WPA2, WPA/WPA2 Mixed mode
security.
Select the option, and click the Setup button.
Default: Disable Security.
Advanced Settings Click Setup to configure advanced settings.
Access Filter Click Setup to configure the access filter
6.2 Security Setup
To enable security, select the desired security mode (WEP or WPA) from the AP setup page
and click Setup to enter the keys.