Digital Duplicator Operation Manual

Standard Printing
15
1
Note
❒ If the image position is not
correct, adjust it using the
{
{{
{Image Position}
}}
} keys or the
fine adjustment dial. See p.18
“Adjusting the Print Image
Position”.
❒ If the image density is slight-
ly dark or light, adjust the
image density using the {
{{
{W
WW
W}
}}
}
or {
{{
{V
VV
V}
}}
} key. See p.20 “Adjust-
ing the Print Image Density”.
D Enter the number of prints
with the number keys.
Note
❒ Up to 9999 prints can be en-
tered at one time.
❒ To change the number en-
tered, press the {
{{
{Clear/Stop}
}}
}
key and enter the new num-
ber.
E Press the {
{{
{Print}
}}
} key.
Note
❒ After printing is completed,
the same number of prints is
automatically set for the next
job.
❒ To stop the machine during
the multi-print run, press the
{
{{
{Clear/Stop}
}}
} key. See p.24
“Stopping a Multi-print
Run”.
❒ To return the machine to the
initial condition after print-
ing, press the {
{{
{Clear
Modes/Energy Saver}
}}
} key.
PinkGold-F_V4_FM.book Page 15 Tuesday, September 11, 2001 6:31 PM