Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Other Printing Problems
81
5
Note
❒ If the problem cannot be solved, contact your sales or service representative.
Network configurations you
have made do not become effec-
tive.
Print a configuration page and check the network settings.
Printing from a Macintosh with
the network standard model is
slow.
Set the Ethernet speed of the machine to 10Mbps. If you want
to use the machine with Macintosh at the Ethernet speed of
100Mbps, call your sales or service representative.
See "Ethernet" in the Network Setup menu.
Status Possible Causes, Descriptions, and Solutions