Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Paper and Other Media
40
3
Loading Paper in the Bypass
Tray
Reference
With the Bypass Tray, you can
load up to 100 pages at the same
time. For more information about
the type, size and feed direction of
paper that can be loaded in the
tray, see p.25 “Paper Types and
Sizes”.
Note
❒ If you set custom size paper, you
should set the paper size using the
printer driver. Also, use the con-
trol panel to set the custom size set-
ting.
A
AA
A
Open the Bypass Tray.
B
BB
B
Slide the side guides outward,
and load paper until it stops with
the print side up.
Note
❒ If you load A4K or lager, or
8
1
/
2
× 11 K or larger, slide out
the Bypass Tray extension (A )
and then flip it open (B).
C
CC
C
Adjust the side guides to the pa-
per width.
Important
❒ Confirm that paper fits under
the side guides.
ZGDY190J
ZGDY200J
ZGDY210J
ZGDY220J