Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Paper and Other Media
38
3
D
DD
D
Carefully slide the paper tray into
the printer until it stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
Changing the paper size
Important
❒ Confirm that the setting of the pa-
per size dial matches the paper size
and feed direction of the paper in
the tray, otherwise the printer
might be damaged, or printing
problems might occur.
A
AA
A
Lift the paper tray slightly then
pull it out until it stops. Adjust
the paper size dial to match the
size and feed direction of paper in
the paper tray.
Important
❒ If you want to use the paper size
and feed direction that are not
indicated on the paper size dial,
set the dial to “p”. In this case,
you should set the paper size
using the control panel. See
p.106 “Paper Input Menu”.
B
BB
B
While lifting the front side of the
tray, pull it out of the printer.
C
CC
C
If you load paper larger than A4
K
KK
K or 8
1
/
2
×
××
× 11 K
KK
K, you should ex-
tend the tray as follows:
Note
❒ You cannot load paper smaller
than A4 K or 8
1
/
2
× 11 K, if the
tray is extended. In this case, re-
turn the tray to its standard
length.
A Slide the catches inwards to
unlock the tray.
ZCEY150J
ZCEY110J
ZCEY140J
ZCEY160J