Printer User Manual
Table Of Contents
- AP2610 Printer Reference
- Trademarks
- Manuals for This Printer
- How to Read This Manual
- TABLE OF CONTENTS
- 1. Setting Up the Printer Driver and Canceling a Print Job
- PCL 6/5e - Accessing the Printer Properties
- RPCS - Accessing the Printer Properties
- PostScript - Setting Up for Printing
- Canceling a Print Job
- 2. Uninstalling the Printer Driver and Software
- 3. Paper and Other Media
- 4. Sample Print/Locked Print
- 5. Troubleshooting
- 6. Making Printer Settings with the Control Panel
- 7. Appendix
- INDEX
Paper and Other Media
36
3
• damp
• excessively curled or twisted
• stuck together
• damaged in any way
• with stamps attached
• with windows, holes, perforations, cutouts or embossing
• with metal clasps, string ties or metal folding bars
• designed to be interlocked
• with nicked edges or bent corners
• with rough, wrinkled or laid finishes
• with any exposed adhesive, when the flap is in the sealed or closed posi-
tion
Printable Area
The following shows the printable area for this printer. Be sure to set the print
margins correctly by the application.
A
: printable area
Important
❒ The maximum printable length is 432 mm (17 inches) in the paper feed direc-
tion.
Note
❒ The printable area may vary depending on the paper size, printer language
and printer driver settings.
4.2mm
(
1/6 inches)
4.2mm
(
1/6 inches)
1
4.2mm
(
1/6 inches)
4.2mm
(
1/6 inches)
4.2mm
(
1/6 inches)
4.2mm
(
1/6 inches)