Digital Color Copier/Printer Operator Guide

Setting Originals of Different Sizes in the Document Feeder
23
1
Setting Originals of Different Sizes in the
Document Feeder
Preparation
To use this function, you have to select ADF Mixed Sizes mode with the user
tools. ⇒ P.142
“ADF/Sorter”
.
You can insert a stack of originals of different standard sizes (e.g. A4, B5 etc.) into
the document feeder. These originals are individually fed onto and removed
from the exposure glass.
Limitation
❒
The weight of originals that can be set with this function is 52 - 81g/m
2
, 14 -
20 lb.
❒
Smaller size originals might be skewed a little.
Note
❒
If your stack of originals contains pages of different sizes, make sure that:
• Longer originals are at the bottom of the stack, and shorter originals are at
the top.
• All originals are flush with the back fence of the document feeder.
A Align the rear and left edges of the originals as shown in the illustration.
1. Document feeder feed direction
2. Vertical size
B Adjust the guide to the widest original size.
C Set the aligned originals face up into the document feeder.