Digital Copier Operator Manual

Copying
78
2
C Enter the length of the original with the number keys and press the
[
#
]
key.
Note
❒
You can enter sizes within the following ranges:
❒
To change the length entered, press the
{
Clear
}
key on the control panel or
[
Clear
]
key on the display and enter the new length.
D Enter the length of the copy with the number keys and press the
[
#
]
key.
Note
❒
To change the length entered, press the
{
Clear
}
key on the control panel or
[
Clear
]
key on the display and enter the new length.
❒
To change the length after pressing the
[
#
]
key, select
[
Original
]
or
[
Copy
]
key
and enter the desired length.
E Set your original, then press the
{
Start
}
key.
Metric version 1 - 999 mm (in 1 mm steps)
Inch version 0.1" - 99.9" (in 0.1" steps)