Digital Copier Operator Manual

Basic Functions
37
2
A Press the appropriate key to select the original type.
Note
❒
If you do not wish to set any other functions, press the
{
Start
}
key to start
copying.
Selecting Copy Paper
There are two ways to select copy paper:
❖
Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio
⇒
P.39
“Image Rotation”
.
❖
Manual Paper Select
Choose the tray containing the paper you wish to copy onto: Paper Tray,
Large Capacity Tray (LCT).
Note
❒
Auto Paper Select mode is intended for normal and recycled paper.
❒
If you set all the paper trays other than “Plain” or “Recycled Paper”, you can-
not use Auto Paper Select.
❒
Refer to the following table for possible copy paper sizes and directions with
Auto Paper Select (when copying at a ratio of 100 %):
❖
Metric version
*1
You can select from 8
1
/
2
"
×
13", 8
1
/
4
"
×
13" and 8"
×
13" with the User Tools (Sys-
tem Settings). See “Original: F/F4 Size Setting” in the System Settings manual.
Where Original Is Set Paper Size and Direction
Exposure glass
A3 L, B4 L, A4 KL, B5 KL, A5 K, 8
1
/
2
"
×
13"
L
*1
Document feeder A3 L, B4 L, A4 KL, B5 KL, A5 KL, 11"
×
17"
L, 11"
×
15" L, 8
1
/
2
"
×
11" KL, 8
1
/
2
"
×
13" L
*1