Digital Copier Operator Manual

Copying
24
2
F Enter the number of copies required with the number keys.
Note
❒
The maximum copy quantity can be set between 1 and 9999 (default:
9999
).
See “Maximum Copy Quantity”
⇒
P.312
“General Features”
.
❒
To change the number entered, press the
{
Clear
}
key and enter the new
number.
G Press the
{
Start
}
key.
The machine starts copying.
Note
❒
Usually, when you set a single original on the exposure glass or in the doc-
ument feeder, the copies are delivered face-up. However, with some func-
tions copies will be delivered face-down.
❒
You can choose to have copies delivered either face up or face down. See
“Face-up/down Eject From Platen”
⇒
P.328
“Input/Output”
.
❒
To stop the machine during a multi-copy run, press the
{
Stop
}
key.
❒
To clear these copy job settings and return the machine to the initial condi-
tion after copying, press the
{
Clear Modes
}
key.
-
Auto Reset
The machine automatically returns to the initial condition a fixed period of time
after your job is finished. This function is called “Auto Reset”.
Note
❒
You can change the Auto Reset delay. See “Copy Reset Timer”
⇒
P.312
“Gen-
eral Features”
.