Digital Copier Operator Manual

REMARKS
334
7
Where to Put Your Machine
Machine Environment
Your machine's location should be carefully chosen because environmental con-
ditions greatly affect its performance.
Optimum Environmental Conditions
R
CAUTION:
R
CAUTION:
• Temperature: 10 – 32
°
C (50 – 89.6
°
F) (humidity to be 54 % at 32
°
C, 89.6
°
F)
• Humidity: 15 – 80 % (temperature to be 27
°
C, 80.6
°
F at 80 %)
• A strong and level base.
• The machine must be level within 5 mm, 0.2" both front to rear and left to
right.
• To avoid possible buildup of ozone, make sure to locate this machine in a
large well ventilated room that has an air turnover of more than 30 m
3
/hr/
person.
Environments To Avoid
• Locations exposed to direct sunlight or strong light (more than 1,500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air
from a heater. (Sudden temperature changes might cause condensation with-
in the machine.)
• Locations close to such machines generating ammonia as diazo copy ma-
chine.
• Places where the machine might be subjected to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.
•
Keep the equipment away from humidity and dust. Otherwise a fire or an
electric shock might occur.
• Do not place the equipment on an unstable or tilted surface. If it topples
over, it could cause injury.
• If you use the equipment in a confined space, make sure there is a continu-
ous air turnover.