Digital Copier Operator Manual

Settings You Can Change with the User Tools
327
6
Size You can set the size of the stamp that is printed in Page
Numbering mode.
Note
❒
Default:
Auto Select
❒
This setting is linked with the Date Stamp.
Duplex Back Page
Number Position
You can set the position of the duplex back page number
that is printed in Duplex mode.
Note
❒
Default:
Opposite Position
Page Numbering In
Combine Mode
You can set how the pages are numbered when you use the
Combine function and Page Numbering function together.
Note
❒
Default:
Per Original
Copy On Slip Sheet In
Designate Mode
You can select whether to print the page number onto slip
sheets when you use the Designate function, “Copy” and
Page Numbering together.
Note
❒
Default:
Off
❒
If you combine with the Designate function, you can use
only 1-1, 1-2… format.
Superimpose You can select whether page numbers are printed negative
when they overlap black parts of the image.
Note
❒
Default:
Off
Position Priority
Position : P1, P2,
Position : 1/5, 2/5
Position : -1-, -2-
Position : P.1, P.2
Position : 1, 2
Position : 1-1, 1-2
You can set the position.
Press the arrow keys to adjust the position.
Note
❒
Default:
• Metric version
• Position: P.1, P1, 1, 1/5:
Top Right
, -1-, 1-1:
Bottom
Center
• Margin: P.1, P1, 1, 1/5:
12mm
, -1-, 1-1:
8mm
• Inch version
• Position: P.1, P1, 1, 1/5:
Top Right
, -1-, 1-1:
Bottom
Center
• Margin: P.1, P1, 1, 1/5:
5"
, -1-, 1-1:
3"
Menu Description