Digital Copier Operator Manual

Settings You Can Change with the User Tools
315
6
Auto Text/Photo
A
When there are photo(s) and text on the original, this set-
ting determines whether photo or text takes priority.
B
Adjust the density of Auto Text/Photo.
Note
❒
Default:
Normal
❒
[
Service Mode
] is the value set during service setup.
❒
[
Normal
] achieves a good balance between text and pho-
tos.
Photo
A
For a photo original, adjust the finish quality level to
match the type of photo original.
B
Adjust the density.
Note
❒
Default:
Normal
❒
If you change this setting during the document server
function is using the finish image may differ.
❒
[
Service Mode
] is the value set during service setup.
❒
Select [
Press Print
] for printed photo originals with
coarse dots, and [
Glossy Photo
] for printed photo origi-
nals with fine dots.
❒
”Normal” is a well-balanced quality level for printed
Photo, Pale, Photo, and Text.
Pale
A
Adjust the quality level for the finish of a pale original
with normal density.
B
Adjust the density.
Note
❒
Default:
Normal
❒
[
Service Mode
] is the value set during service setup.
Generation
A
Adjust the quality level so as not to thicken the lines of
the finish image.
B
Adjust the density.
Note
❒
Default:
Normal
❒
[
Service Mode
] is the value set during service setup.
Menu Description