Digital Copier Operator Manual

Changing the Paper Size
295
5
C Square the paper and set it in the tray.
Important
❒
Do not set more than the capacity of the tray.
❒
Make sure that the paper stack is flush with the right side fence.
Note
❒
Fan the paper before placing it in the tray.
❒
Correct the paper, if curled or warped, before placing it in the tray.
D Set the paper size selector at the outermost part of the tray to the new paper
size.
To adjust the paper size to one not available with the paper size selector
A Set the paper size selector knob to the
p
mark on the left.
B Press the
{
User Tools
}
key.
C Press the
[
System Settings
]
key.
D Press the
[
Paper Size Setting
]
key.
E Press the
[
Tray 2:Paper Size Setting
]
key.
F Select the paper size then press the
[
OK
]
key.
G Press the
[
Exit
]
key or press the
{
User Tools
}
key to exit the User Tools.