Digital Copier Operator Manual

What to do if Something Goes Wrong
268
5
If Connect Copy is Cleared
Machine Status Cause Action
Exited Connect Copy. The master unit main pow-
er switch has been turned
off or the operation switch
has been pressed.
On the master unit, either
turn on the main power
switch or press the opera-
tion switch, then press the
[
Connect
] key and start
your copy job again.
Either the sub-unit main
power switch has been
turned off or the operation
switch has been pressed.
A message requesting you
to check the sub-unit is dis-
played on the master unit.
Press the [
Cancel
] key to
clear connect-copying. Ei-
ther turn on the main pow-
er switch on the sub-unit
or press the operation
switch. Then press the
[
Connect
] key.
The Weekly Timer function
has automatically turned
the master unit off.
Press the master unit oper-
ation switch. Then press
the [
Connect
] key and copy.
Reference
See “Weekly Timer” in
the System Settings
manual.
An error message indicat-
ing a breakdown is shown
on the master unit display.
L
indicator is lit. Follow the instructions
displayed in the error mes-
sage. Copying is not possi-
ble.