Digital Copier Operator Manual

Relationship between Master Unit and Sub-Unit Copier/Document Server Features
255
4
Relationship between Master Unit and
Sub-Unit Copier/Document Server
Features
This section describes which Copier Feature settings are used by the master unit
and sub-unit in Connect Copy mode.
Note
❒
In Connect Copy mode the
{
User Tools
}
key on the sub-unit is disabled. To ac-
cess to the User Tools on the sub-unit, you need to exit Connect Copy mode
first.
Reference
See
⇒
P.312
“Settings You Can Change with the User Tools”
.
Symbol Meaning
✩
The master unit and sub-unit use each setting
←
Both units use the master unit setting
— Unrelated
Menu Master
unit
Sub-unit Remarks
General Features
Auto Paper Select Priority
✩
— Trays with the same size and
direction of paper will be se-
lected from the master unit
and sub-unit automatically.
Auto Image Density Select
Priority
✩
—
Original Mode Priority
✩
—
Duplex Mode Priority
✩
—
Copy Orientation in Duplex
Mode
✩
—
Original Orientation In Du-
plex Mode
✩
—
Initial Mode Set
✩
—
Maximum Copy Quantity
✩
—
Copy Reset Timer
✩
— Connect Copy will be can-
celled according to the timer
on the master.