Digital Copier Operator Manual

Using Connect Copy
251
4
-
Auto Off
The machine turns itself off automatically a certain period of time after your job
has finished. This function is called “Auto Off”.
Note
❒
The Auto Off function is available only for the main unit.
Reference
See “Auto Off Timer” in the System Settings manual.
Exiting Connect Copy Mode
A Press the
[
Connect
]
key on the master unit.
The
[
Connect
]
key will be deselected.
Note
❒
Settings which were selected on the master unit while in Connect Copy
mode will not be cleared.
❒
Press the
{
Clear Modes
}
key to cancel the master unit settings and return to
the initial state.
❒
The sub-unit will return to the state which is before entering Connect Copy
mode.
Reference
If you cannot exit Connect Copy mode, see
⇒
P.269
“If You Cannot Exit
Connect Copy”