Digital Copier Operator Manual

Using Connect Copy
249
4
❒
When scanning from the exposure glass, set the next page(s) when scan-
ning has finished, then press the
{
Start
}
key. When all pages have been
scanned in, press the
{
#
}
key. Copying starts simultaneously in the master
unit and sub-unit.
❒
To stop originals being scanned or copied, press the
{
Stop
}
key on the mas-
ter unit and follow the instructions on the display, press the
[
Yes
]
key.
G Pick up your copies from the master unit and sub-unit.
Note
❒
The number of copy sets made by the master unit and sub-unit may differ.
❒
The master unit and sub-unit may not finish copying exactly at the same
time.
❒
When using the Sort/Staple function, copies are organized into copy sets.
If there is a paper misfeed in one machine during this process, it is not pos-
sible for the other machine to take over the copy set processing of the non
functional machine.
❒
When using Document Server functions, only the master unit will make
copies by the combination of the features.
-
Copy output order
❖
When copying in Sort/Staple mode
e.g., copying 6-sets of a 3-sheet original
• Copying with the master unit (face-down output)—sub-unit (face-down
output)
1. Master unit
2. Sub-unit
When using Sort/Staple, your copies sets are not split between the master
unit and sub-unit.