Digital Copier Operator Manual

7
Control Panel
1. Status indicator
2.
{
Screen Contrast
}
knob
Adjusts the brightness of the display pan-
el.
3.
{
Language Selection
}
key
Press to change the display language.
4.
{
Interrupt
}
key
Press to make interrupt copies during a
copy run. See
⇒
P.68
“Interrupt Copy”
.
5.
{
Energy Saver
}
key
Press to switch to and from Energy Saver
mode. See
⇒
P.68
“Energy Saver Mode”
.
6.
{
Clear Modes
}
key
Press to clear any previously entered
copy job settings.
7.
{
Program
}
key
Press to register or recall a program. See
⇒
P.55
“Programs”
.
8.
{
Stop
}
key
Press to stop a copy job in progress.
9.
{
Start
}
key
Press to start copying. If pressed just after
the machine is turned on, the job will
start after the warm-up period. See
⇒
P.70
“Auto Start”
.
10.
{
Sample Copy
}
key
Use this key to make a single sample
copy set before starting a long copy run.
Color Status
Off Ready to make
copies
Flashing green Scanning originals
Lit green Copying (You can
scan originals.)
Flashing red Toner has nearly
run out