Manualshelf

Fax Machine User Manual

ManualsBrandsLanier ManualsFax Machine2002
81828384858687888990
TX Operation
4 - 24 Facsimile Programming
Closed Network TX
When closed network TX/RX mode is set ON, transmission is possible only with the
destination stations registered in One-Touch and Speed Dial.
1
Press the PROGRAM Key and scroll through the
menus until you reach the TX Operation Menu.
Press YES to begin programming.
2
Press 1 or scroll down to the Closed Network menu
and press YES.
3
Using the Left and Right arrows, select the option
you wish to have as the default and press YES to
enter this selection into memory.
Fax Forwarding
This allows a user to set 20 different remote telephone numbers for fax forwarding. If
you specify a telephone number, only those messages from that number will be
forwarded. If you don’t specify a remote telephone number, all the incoming message
will be forward to specified location.
1
Press the PROGRAM Key and scroll through the
menus until you reach the TX Operation Menu.
Press YES to begin programming.
2
Press 3 or scroll down to the Fax Forwarding menu
and press YES.
3
Select a location number 01 through 20 to which
you wish forward your messages. Press YES to
enter this selection into memory.
4
Select either ON or OFF and press YES.
5
Select the day you wish the forwarding to begin
and press YES.