Installation & Assembly

Step 2
Step 3
2.1 Place the Leg (A) and Leg (B) with Top Stretcher (C) and Bottom
Stretcher (D) as shown.
2.2 Align the tenon of Top Stretcher (C) and into the Leg.
2.3 Align the tenon of Bottom Stretcher (D) into the leg.
Then, 3.1 fix the Top Stretcher with JCBC Bolt ① + Spring Washer + Flat
Washer using Allen Key ②.
Then, 3.2 fix the Bottom Rail with Screw ⑥ using Screwdriver (not
provided).
DO NOT FULLY TIGHTEN SCREWS.
3.1
3.2
2.1
2.2
2.3
Page 4 of 7