Installation & Assembly

Step 4
4.1 Repeat step 2, Fix the Table Leg (B) with JCBB Bolt ① + Spring Washer
+ Flat Washer using Allen Key ②.
4.2 Fix the Cross Bar (C) with CSK Screw ⑤ using Screwdriver (not
provided).
In case the table wobbles, need loosen tighten the screw and bolts, and use
your hand press the top of the table, to make sure the table eveness, and
then full tighten the bolts sequence.
FULLY TIGHTEN THE BOLT.
With assistance from your adult partner, stand the Table up.
Your Table is now ready for use.
Caution: This table can only be used on a flat, level surface.
4.1
4.2
Page 5 of 6