Installation & Assembly

Step 2

Step 3

Place the Cushion Chair Seat(E) on the clean Table Top and place the

Back Leg (C) Back Leg (D) on the corner block as shown.

Then, fix the Back Leg (C) and (D) with JCBC Bolt ① using Allen Key ②.

DO NOT FULLY TIGHTEN THE BOLT.

Repeat Step 1, place the Front Leg (A) and Front Leg (B) on the corner

block as shown.

Then, fix the Front Leg (C) and (D) with JCBC Bolt ① using Allen Key ②.

DO NOT FULLY TIGHTEN THE BOLT.

①

If wobble

③

Test again

②

50mm

Page 4 of 6